Outdoor LV Electrical Feeder Pillar

Ambient air temperature: -25℃~+40℃, average temperature in 24h should not exceed +35℃.

Altitude should not exceed 2000m;

Air relative humidity: relative humidity can be 100% at +25℃;

Surrounding medium should be free of conductive dust or inflammable or explosive danger, no medium that would destroy the insulation;

The installation site should be free of strenuous vibration or impact. Installation obliquity should not exceed 5°.
feeder pillar 1

Features

The distribution cabinet has front and rear doors, its shell uses stainless steel welding with strong anti-rust capability, the upper part has mesh vents, the lower part has shutters, which forms air channel between the upper and lower parts;

The power distribution cabinet has distribution metering, feed and voltage measurement, reactive power compensation and leakage protection and other functions, and it can select the appropriate components according to the size of transformer capacity;

The power distribution cabinet uses leakage pulse protection device combined with leakage relay and AC contactor, the device will cut off current when the leakage current of the protected power supply system is gradually increased to reach more than the rated residual operating current of relay;

The switch of the reactive power compensation part can use static AC contactor, it can also use combination switch or non-contact switch to switch capacitor, thus the switching process has no flashy flow, no over-voltage operation, no arc, fast response and no operating noise, and its operation is stable and reliable; in three-phase unbalanced load position, it can take phase splitting compensation with compensations of three phases, it can ensure consistency of power factors of three phases

feeder pillar 1-1