Fiberglass SMC Electrical Distribution Box Mould Tooling

Fiberglass SMC Electrical Distribution Box Mould Tooling

SMC meter box is made by craft of molding SMC unsaturated polyester resin, Fiberglass reinforced plastics.
Send Inquiry
Chat Now
Product Introduction

fiberglass SMC electrical distribution box mould tooling

Test items                               Performance 
Vibration testAmplitude: 10mm
Vibration frequency: 4.0Hz
Acceleration: 7m / s2
Duration: 30min
Mechanical impact testShock Waveform: Half Sine Wave
Impact parts: 6 faces
Shock times: 3 times per side impact
Drop testHeight: 1000mm
Drops: 6 faces
Number of drops: 2 drops per side
Collision testPeak acceleration: 400m / s2
Pulse duration: 6ms
Number of collisions: 1000
Temperature and humidity testTest temperature: 40 ° C
Test humidity: 93% RH
Test time: 12h
Rapid temperature change testTest temperature: -10 ºC ~ 65 ºC
Number of trials: 10 times
Test time: 24h
High temperature test Test temperature: 55 ° C
Test time: 4h
During the test and after the test, the samples were working properly.
Low temperature testTest temperature: -10 ° C
Test time: 4h
During the test and after the test, the samples were working properly.
Salt spray testSalt concentration: 5%
  Salt solution pH: 7.0
Test chamber temperature: 35 ºC
Pressure bucket temperature: 47 ºC
Compressed air pressure: 0.13Kgf / cm2
Spray: 1.2ml / 80cm2 / H
Continuous atomization time: 16h
During the test and after the test, there was no adverse phenomenon on the surface of the sample
Protection ClassIP54
Insulation  detectionInsulation resistance is 200MΩ


Avalible Models:

111




Hot Tags: fiberglass smc electrical distribution box mould tooling, China, suppliers, manufacturers, factory, customized, price, for sale

(0/10)

clearall