How to correctly connect industrial plugs and sockets
How to use industrial plug and socket connectors? First of all, ZFY TECH (Zhejiang Zhongfeiya Technology Co., ltd) will guide you the way:first you must understand its basic connection operation, so that we can use it correctly.
Check the condition of male and female electrical plugs and sockets when you open the box.
2. First check the plug, check whether the internal jack or pin is in good condition, and whether there is any excess inside.
2. Then check the socket. Similarly, check whether the internal jacks or pins are intact and whether there are any extras inside.
3. After checking, confirm whether the plug and socket are of the same type and number.
4. Hold the flange of the socket with your left hand, and hold the plug with your right hand to face the socket. The large protruding hole on the inner edge of the plug is aligned with the large notch on the inner edge of the socket.
5. Still holding the flange of the socket with your left hand, keeping your right hand facing the direction of the socket, screw in the plug clockwise evenly.
6. When the plug presses the red line mark on the outside of the socket, it indicates that the connection is in place.
Once still confused,pls feel free to contact Zhongfeiya Technology. Zhongfeiya are professional at offering providing high quality industrial plugs and sockets:
Zhejiang Zhongfeiya Technology Co., ltd.
Tel:+86 571 86290312 Fax:+86 571 86292737
Cell/WhatsApp/Wechat: +86 17306718762
Office Add: Room 1008,Wanli Building,WuChang Town,
Yuhang District,Hangzhou City, Zhejiang Province,311121, China.
Factory Add:No.332 Wei 19 th Road, Yueqing Economic Development Zone, Yueqing City, Zhejiang Province.
