Classification
◦ Classification by Material: There are stainless steel explosion-proof junction boxes, cast aluminum explosion-proof junction boxes, explosion-proof and anti-corrosion junction boxes made of engineering plastics, etc.
◦ Classification by Usage Structure: It can be divided into wall-mounted explosion-proof junction boxes and vertical explosion-proof junction boxes.
◦ Classification by Explosion-proof Type: There are flameproof junction boxes, increased-safety junction boxes, etc. The flameproof junction box prevents and cuts off the spread of internal explosions to the external explosive hazardous environment through the flameproof surface of the box body; the increased-safety junction box takes corresponding measures to improve its safety level on the equipment structure that does not generate arcs, sparks, or substances capable of igniting explosive mixtures under normal operating conditions.
Features and Application Scope
◦ Features: Junction boxes usually have functions such as water resistance, dust resistance, and corrosion resistance, and can adapt to different working environments. Their structure is reasonably designed, the wiring is convenient, firm and reliable, and they have certain compressive capacity and electrical insulation performance.
◦ Application Scope: It is widely used in explosive hazardous environments such as petroleum refining, storage, chemical industry, medicine, textile, dyeing, and military facilities. It can also be used to connect automatic control, communication signals, and power cords, etc., and can also be used for signal transmission in intrinsically safe circuits such as explosion-proof instruments, explosion-proof communication systems, and explosion-proof monitoring systems.
Selection Method
◦ Environmental Requirements: Select the corresponding type of junction box according to different usage environments. For example, in explosive gas environment areas, explosion-proof junction boxes should be selected; under harsh conditions such as strong corrosive gas environments, stainless steel explosion-proof junction boxes or explosion-proof and anti-corrosion junction boxes made of special materials can be selected.
◦ Wiring Requirements: Select an appropriate junction box according to the actual wiring requirements. For example, the number of wires to be connected, the specifications of the wires, the direction and number of inlet and outlet wire ports, etc.
◦ Protection Level: Select a junction box with the corresponding protection level according to the requirements of the usage environment. For example, for junction boxes used in outdoor environments, products with a higher protection level (such as IP65) should be selected to ensure their water resistance and dust resistance.
◦ Explosion-proof Type: If there are hazardous substances such as explosive gases or dust in the usage environment, select the corresponding explosion-proof type of junction box according to the grade of the hazardous area and the type of explosive substance, and ensure that it has passed strict evaluation and certification.
Installation and Maintenance
◦ Installation: The junction box should be installed in a ventilated, dry place without corrosive gases, and avoid direct sunlight. When installing, it should be firmly fixed and not easy to move, and ensure that the junction box is well grounded. When connecting the power cord, pay attention to the polarity of the power cord to avoid damaging the equipment.
◦ Maintenance: Regularly inspect and maintain the junction box to ensure that its internal components are not damaged, the wiring is firm, and the sealing is good. If any damage or malfunction of the junction box is found, repair or replace it in a timely manner. At the same time, pay attention to keeping the junction box clean and avoid dust and debris from entering the box.
分享
防爆接线箱的市场规模及发展趋势分析
隔爆型接线箱和增安型接线箱的应用场景有何不同?
选择防爆接线箱时需要考虑哪些因素?





