News

Home/News/Details

Other Distance Requirements--Distance Requirements For Various Components in The Electrical Cabinet

Maintain channel distance
In order to facilitate the daily maintenance and repair of the electrical cabinet, a maintenance channel with sufficient width should be set up in front of the cabinet. For low-voltage cabinets, the width of the maintenance channel should generally not be less than 800mm; when the length of the cabinet exceeds 6m, the width of the channel should not be less than 1000mm, and an outlet should be set at each end of the cabinet. On the back and side of the electrical cabinet, if maintenance operations are required, a passage distance of not less than 600mm should also be reserved.
(2) Cable laying spacing
When laying cables inside the electrical cabinet, a certain distance should be maintained between different types of cables to avoid mutual interference. For example, the distance between power cables and control cables should not be less than 150mm; shielding measures should be taken between signal cables and power cables. If shielding is not taken, the distance should not be less than 500mm. At the same time, there are also requirements for the bending radius of cables inside the electrical cabinet, which should generally not be less than 6-10 times the outer diameter of the cable to prevent cable damage