An electric meter box is a distribution device that can be directly fixed to a wall or installed on a power pole, and can install any specification of electronic meters, mechanical meters, leakage protectors, junction boxes, leakage switches DZ47 or RCL fuses, and isolation switches. The knife switch electric meter and switch are separately isolated and separated, allowing users to control the switch. The circuit is not exposed and has anti theft function.
The electric meter box includes two main parts: single-phase meter box and three-phase meter box, suitable for AC 50HZ or 60HZ, and rated working voltage up to 200V and 380V.
Installation and use of the meter box: Please carefully check the integrity of all components of the meter box during installation. The meter box should be installed vertically with an inclination angle. The degree should not exceed 5 °.
The installation position of the electric meter box should be selected in a place without severe vibration, impact, and insufficient corrosion of electrical components. Due to the material used in the lock of the meter box being resistant to strong alkalis, oxidizing acids, amines, ketones, soluble oxidizing agents, and aromatic deep agents, contact or use with these chemicals should be avoided.
During the use of the meter box, sharp objects and hard objects should be avoided from colliding and scratching the surface of the meter box. When installing the meter box, it is best to choose a cool and dry place to avoid direct sunlight for a long time, in order to extend the service life of the meter.
